Motorized functional lifting frame to transform an ordinary bed into a functional hospital bed for bedridden patients - Portoflex Motor

PORTOFLEX MOTOR motorized slatted bed frame 80 x 195 cm. The Portoflex Motor bed frame is a comfortable and strong bed frame with a load capacity of 130 kg, positioned by 2 independent motors for the leg and head area: very flat design with motors located on the side of the frame bed, allows you to fully use the pull-out storage space under the bed, the handle prevents the mattress from moving when the bed is installed, automatic power off. current, if the drive is not working, manual resetting of the grid in the event of a power failure by means of a mechanical release of the rods in the central part of the grid.

By mechanically lifting and holding the foot section, access to the storage space under the bed can be provided by a remote control. Flexible slats in 7 anatomical zones are placed in double rubber bushings above the sidewall, they rotate and react along their entire length. In these cases, the bars are placed above the grate frame, which means that the grate springs even along the edge, and the overall response of the grate to movement and to various positions of the human body increases.

The bar grommets are available in two different stiffnesses and divide the mesh into seven zones for optimum pressure distribution and support. The shoulder straps are cushioned by drilling, which reduces pressure on the shoulders when sleeping on the side. In the lumbar region, the grille is equipped with retractable bushings, with which you can adjust the rigidity of the grille as desired. The center bar provides more stability to the grille, reinforces the grille, and increases the shock resistance of the grille. In addition, the mesh is covered with foil, so it collects less dust and is easy to wipe clean. Moisture does not penetrate through the grid, which means that the environment is free from bacteria and mold. In addition, the film protects the mattress from scratches on the mattress topper.

• Mesh height: 10cm
• Max. load capacity: 130 kg
• The actual lattice size is always 1 cm narrower and 5 cm shorter than the declared size.
• This is a common workflow for installing a slatted frame into any bed frame.
• Fits for a 80 x 200 cm frame bed.

Please select the package of delivery from the drop-down menu on the right:

1. Rent of a functional frame without a mattress - 50 Eur / month
2. Rent of a functional frame with an anti-decubitus mattress and a waterproof sheet - 80 Eur / month
3. Rent of a functional frame with an anti-decubitus mattress and a waterproof sheet + a dynamic air mattress with two contours - 100 Eur / month

Rent terms:

• Minimum accountable rental period: 1 month (only subject to pickup from the Riga warehouse)
• Delivery and installation: starting from 50 Eur. Please contact us by phone BEFORE placing your order
• The bed can be folded and placed in a passenger car for transportation. The bed can be lifted personally to any floor.
• The rental prices are valid for rents minimum up to 1 month
• For rents minimum up to 3 months anti-decubitus mattress - free of charge
• Deposit is not required
• PLEASE CALL +37129535888 BEFORE ORDERING TO CHECK THE AVAILABILITY OF THE FRAME